Create network

XXXXXXXXXXXXX

First of all, you must access the networks page, the path to access is the following:

Main Menu > Administration > Resources > Networks

Once you are located on the networks page, you must click the button with the add symbol (+)  to add a new network. Then Soffid will display a new empty page to fill in the network data.

You must fill, at least the required fields (fields with an asterisk) to create a network.

• The name must be an identificative network name, that will be a unique network name (no spaces and no symbols).
• The description must be a brief description about the network.
• The IP Address must be the real network IP address you want to scan.
• The IP Address mask must specify the network's available hosts.

Other fields you could configure

• The Internal network allows you to indicate if this network is fully managed or not. 
• The Support DHCP allows you to determine if the hosts those belong to this network will be automatically registered on Soffid.
• The  DHCP attributes allow you to enter additional parameters that DHCP server will use to assemble DHCP response. Usually it will have a gw=0.1.2.34 like parameter. It is only needed when a DCHP connector is configured.

Auto calculated fields

• The Used IPs will be  IP addresses used..