Integration flows - Update user

Update

Introduction

Soffid provides a workflow to modify and/or delete a user in the final system. In it, we can see each of the steps of which this process is composed. 

Diagram

Step by Step

In this document, we will explain the process that Soffid performs to modify a user for the SQL connector.

1. UpdateUser

First of all, Soffid checks if the user exists in Soffid and then checks the operation to perform, update or delete. 

1.1. If the user does not exist in Soffid, the process finishes [10. End]. 

1.2. If the user exists in Soffid, the process continues through [2. User to remove?].

2. User to remove?

2.1. If the user is marked for Deletion, Soffid will ask for user consent to continue with the process or to cancel it. If the answer is Yes, the process follows through the Yes branch, [3. Delete branch].

2.2. If the user is marked for Update, it continues with the flow following through the No branch, [4. Insert or Update branch].

3. Delete branch

3.1. When the operation to perform is to delete a user, first of all, Soffid has to check if the user exists in the target system. To do this, Soffid executes the property check of the User object. This property executes the SQL command to check if the user exists or not.

3.1.1. If the user does not exist, there are no actions to perform in the target system, so the process finishes [10. End].

3.1.2. If the user exists, the flow continues executing the pre-delete triggers if there is anyone configured. More than one script can be configured. These scripts are executed just before the main action, user delete, and the result (true or false) determines if the main action will be performed or not.

3.1.2.1. False: if the result is false for one or more of these triggers, the process finishes [10. End].

3.1.2.2.True: if the result is true for all of these triggers, Soffid continues to the next step.

3.1.3. Soffid removes the user. To do that, Soffid executes the property delete of the User object.

3.1.3.  Then Soffid executes the post-delete triggers if any. These triggers can be used to perform a specific action just after performing the remove user operation on the target object.

3.1.3.  Then the process finishes [10. End].

4. Insert or Update branch

4.1. When the operation to perform is to update a user, first of all, Soffid generates the columns values.  That is, Soffid creates an object with the mapping values.

4.2.Then Soffid asks if the user exists in the target system to decide the action to execute, this action can be an update or an insert. Soffid executes the property check of the Account or User object.

4.2.1. If the user does not exist in the target system, the process continues through [5. Insert user branch]. 

4.2.2. If the user exists in the target system, the process continues through [6. Update user branch].

5. Insert user branch

5.1. Soffid executes the pre-insert triggers if there is anyone configured. More than one script can be configured. These scripts are executed just before the main action, user create, and the result (true or false) determines if the main action will be performed or not.

5.1.1. False: if the response is false for one or more of these triggers, the process finishes [10. End] and the user is not created.

5.1.2. True: if the response is true for all of these triggers, Soffid continues to the next step.

5.2. Soffid creates the user. To do that, Soffid executes the property insert of the Account or User object

5.3. Then Soffid executes post-insert triggers if any. These triggers can be used to perform a specific action just after performing the create user operation on the target object.

5.4. Then the process continues through [7. Grants].

6. Update user branch

6.1. Soffid fetches the current values of the user.  Soffid executes the property selectByAccountName of the Account or User object.

6.2. Then compute delta changes  ¿¿¿¿

6.3. And finally execute the pre-update triggers if there is anyone configured. More than one script can be configured. These scripts are executed just before the main action, user update, and the result (true or false) determines if the main action will be performed or not.

6.3.1. False: if the response is false for one or more of these triggers, the process finishes [10. End] and the user is not updated

6.3.2. True: if the response is true for all of these triggers, Soffid continues to the next step.

6.4. Soffid updates the user. To do that, Soffid executes the property update of the Account or User object

6.5. Then Soffid executes the post-update triggers if any. These triggers can be used to perform a specific action just after performing the update user operation on the target object.

6.6. Then the process continues through [7. Grants].

7. Grants

At this point, soffid runs the actions relative to the grants .........................................

7.1. Once the process arrives at this step, Soffid generates account columns values.  That is, Soffid creates an account object with the mapping values.

7.2. Then, Soffid fetches the current grants for the user / account.  Soffid executes the property selectByAccount of the grant object

7.3. Finally, Soffid parses grant rows, that is Soffid makes the mappings defined 

7.3. Then the process continues through [8. Grant to add]. 

8. Grant to add

This is a loop while there are grants to check. This grants list comes from the previous step [7. Grants].

8.1. If there are No grants to add, the process goes to [9. Grant to Remove].

8.2. Yes, there are grants to add:

8.2.1. Soffid generates grant column values and  Soffid checks if the grant exists in the target system, Soffid executes the property check of the grant object.

8.2.2. Soffid executes the pre-insert triggers if there is anyone configured. More than one script can be configured. These scripts are executed just before the main action, a grant create, and the result (true or false) determines if the main action will be performed or not.

8.2.2.1. False: if the response is false for one or more of these triggers, the process goes to [8. Grant to add] and the grant is not created.

8.2.2.2. True: if the response is true for all of these triggers, Soffid continues to the next step.

8.2.3. If the result of the triggers is true, then Soffid creates the grant. To do that, Soffid executes the property insert of the grant object.

8.2.4. Then Soffid executes the post-insert triggers if any. These triggers can be used to perform a specific action just after performing the create grant operation on the target object.

8.2.5.  Then the process continues through  [8. Grant to add].

9. Grant to remove

This is a loop while there are grants to check. This grants list comes from the previous step [7. Grants].

9.1 No: If there are No grants to add, the process goes to [10. End].

9.2. Yes,  there are grants to remove:

9.2.1. Soffid executes the pre-delete triggers if there is anyone configured. More than one script can be configured. These scripts are executed just before the main action, a grant delete, and the result (true or false) determines if the main action will be performed or not.

9.2.1.1. False: if the response is false for one or more of these triggers, the process finishes [10. End] and the grant is not deleted.

9.2.1.2. True: if the response is true for all of these triggers, Soffid continues to the next step.

9.2.2. If the result of the triggers is true, then Soffid deletes the grant. To do that, Soffid executes the property delete of the grant object. This operation can return a true or false result.

9.2.2.1. False: the delete action could not be performed and the process check for another grant [9. Grant to remove].

9.2.2.2. True: the delete action could be performed properly. Soffid continues to the next step.

9.2.3. Then Soffid executes the post-delete triggers if any. These triggers can be used to perform a specific action just after performing the delete grant operation on the target object.

9.2.4. Then the process continues through [9. Grant to remove].

10. End

The process finishes and the logs are displayed.